Milkweed
Milkweed
This candle design was originally sculpted by my dad to resemble the forms of a milkweed pod. It has a incredibly unique burn. As the wax pool drops down the candle, three spire-like forms reach towards the sky.
This beeswax is pure capping wax from Chester County hives!
Beeswax naturally burns cleaner, brighter, hotter, and longer than most choices and does not require chemical processing or additives to enhance these properties. With an inherently pleasant but gentle aroma, beeswax is the perfect choice for the eco-conscious home.
9.5” Tall, 2” Wide
See Important Candle Care Instructions Below!
Candle Care Instructions
Always burn on a metal or ceramic dish to avoid a fire. Never leave a burning candle unattended.
Wax will eventually drip from this candle. This is unavoidable with the sculptural form of this design. If you’d like a longer burn, extinguish the candle when the wax pool breaks and relight the candle after the wax has cooled. We recommend burning for no longer than 2 hours at a time.
Trim the wick to 1/4" before each lighting. It's important to trim the wick during or immediately after burning your candle. Trimming a cold wick may break the wick off, making relighting it difficult.
If there is a carbon build up (build up that resembles a little black mushroom), extinguish the candle, cut the wick, and re-light.
To prevent uneven burning, use a metal tool to center the wick if necessary.
To extinguish, dunk the wick into the wax pool and straighten.
Relax and enjoy!
